M MachForce Machinery

XCMG · Road Rollers

XCMG XD120EP Electric Light Tandem Roller

A 3-ton battery-electric light tandem roller with a 31.4 kWh battery, 690 Ah capacity, 60/50 Hz dual-frequency vibration and 36/41 kN excitation for asphalt and thin stabilized-layer compaction.

Operating Weight

3,000 kg

Drum Width

1,200 mm

Travel Speed (H/L)

0–10 km/h

Gradeability

30%

XCMG XD120EP Electric Light Tandem Roller

Verified Data

Complete Specifications

Specification Value
Operating Weight 3,000 kg
Drum Width 1,200 mm
Travel Speed (H/L) 0–10 km/h
Gradeability 30%

Overview

The XCMG XD120EP is a 3-ton battery-electric light tandem roller with dual-wheel drive and independent front and rear drum vibration. It is designed for new-road asphalt surface compaction, road maintenance and thin stabilized base layers.

XCMG positions the machine for municipal paving, repairs and restricted work zones where zero emissions, low noise, compact dimensions and good maneuverability matter.

XD120EP electric light tandem roller

Core Specifications

The following values are taken from the current XCMG China product page.

ParameterValue
Operating weight3,000 kg
Static linear load122 N/cm
Vibration frequency60 / 50 Hz
Centrifugal force36 / 41 kN
Theoretical gradeability30%
Battery capacity690 Ah
Battery energy31.4 kWh

Global Export Specification

The global product page lists a different vibration configuration, so it is shown separately rather than merged with the China specification.

ParameterValue
Operating weight3,000 kg
Static linear load122 / 122 N/cm
Vibration frequency42 / 45 / 50 Hz
Amplitude0.42 mm
Centrifugal force37 kN
Drum diameter × width720 × 1,200 mm
Travel speed0–10 km/h
Theoretical gradeability30%
Ground clearance275 mm
Steering angle32°
Battery energy31.4 kWh
Battery voltage128 V

XD120EP electric tandem roller

Key Features

  • Battery-electric operation: zero tailpipe emissions and low operating noise for municipal and restricted-site work.
  • Dual drive and dual vibration: both wheels are driven, and the front and rear drums can vibrate independently.
  • High-frequency compaction: the global page describes small amplitude, high frequency and relatively large excitation force.
  • Dual-frequency exciter: XCMG states that the excenter design provides two excitation-force settings for different working conditions.
  • Compact and maneuverable: small turning envelope, compact structure and reduced operator blind spots.
  • New 5-series design: updated styling, dual-side access and an ergonomic control layout.

XD120EP roller features

Applications

New-road asphalt surface compaction, municipal paving, road repair and maintenance, thin stabilized soil layers, sidewalks, parking areas and confined paving sites.

Data Source

XCMG official China product page: XD120EP, fetched on 2026-10-05. Additional specifications follow the XCMG global product page: XD120EP.

The China page lists 60 / 50 Hz and 36 / 41 kN, while the global page lists 42 / 45 / 50 Hz and 37 kN. These appear to represent different domestic and export configurations and are retained separately. No public product brochure was exposed on the China page.

Specifications follow the XCMG official pages and may vary by batch and configuration. Final configuration and figures must be confirmed after order placement.

Data Source

Specifications are taken from XCMG's published product data. Figures can vary by configuration, market and emission stage — we confirm the exact figures for your machine in the quotation, and we can send the original datasheet on request.

Related Reading

Buying Guides & Insights

Equipment Guide

Road Roller Types: Single vs Tandem Drum, Frequency and Amplitude Explained

Identify the right road roller for the job: single vs tandem drum, static linear load, vibration frequency and amplitude for base and asphalt compaction.

Compliance Guide

CE Marking for Construction Machinery: What EU Importers Must Check

How the CE marking framework works for construction machinery in the EU: the instruments that usually apply, the documents importers should request, who is responsible inside the EU, and what changes on 20 January 2027.

Maintenance Guide

Heavy Equipment Maintenance and Parts: What Owners Should Budget

How to budget maintenance for excavators, loaders, dozers and other heavy equipment: what drives cost, wear parts versus consumables, planned against unplanned downtime, and the parts decisions that matter most.

Import Guide

Import Duty on Construction Machinery: Overview by Country

How import duty, VAT and levies work on construction machinery imported from China — with country-by-country overviews for Nigeria, Philippines, Indonesia, Kenya and the UAE, plus the documents you need.

Shipping Guide

Heavy Machinery Shipping Cost Guide: RORO, Containers and Freight Planning

How shipping costs work for excavators, loaders and cranes imported from China: RORO vs container, transit times by country and cost drivers.

Logistics Guide

Shipping Heavy Equipment from China to Africa: Complete Guide (2026)

How to ship excavators, loaders, cranes and trucks from China to African ports — methods, indicative costs, transit times, documentation, country requirements and mistakes to avoid.